Opening the Sandwich Layer of an Acrylic Keychain: A Step-by-Step Guide

When you want to open the sandwich layer of an acrylic keychain, you may encounter some challenges. The sandwich layer is usually bonded together with a special process, so careful handling is required to separate it successfully. Here are some steps that can help you open the sandwich layer of an acrylic keychain:

Prepare Tools: You will need a small flathead screwdriver or a similar tool. Ensure that the tip of the tool will not scratch the surface of the acrylic.

Find the Opening: Look for a small opening or gap at the edge of the acrylic keychain, usually where the two acrylic pieces meet. This may require careful observation as the opening is usually small.

Insert the Tool: Gently insert the tip of the screwdriver or tool into the opening or gap. Ensure that the insertion depth is moderate and not too deep to avoid damaging the internal structure.

Rotate Gently: Gently rotate the screwdriver or tool, attempting to separate the two acrylic pieces. This requires patience and gentle force, so do not use too much force to avoid damaging the acrylic pieces.

Remove Internal Items: Once the sandwich layer is separated, you can remove the internal items, such as photos or small mementos. Be careful not to let the items drop or get damaged.

Reassemble: After removing the items, reassemble the sandwich layer and ensure that the edges are aligned. If the sandwich layer is not easy to reassemble, you can gently press the edges until it closes completely.

Safety Note: Be careful when handling to avoid scratching or damaging the surface of the acrylic. Ensure the safety of tools and internal items.

I hope these steps help you successfully open the sandwich layer of an acrylic keychain! If you need more help, feel free to ask me.